SIIG Wireless IR Signal Extender Kit

• Wireless transmission distance: up to 656ft (200m) line-of-sight
• Wireless frequency: 915MHz
• Power gain: 10dBm
• IR frequency: 20KHz - 60KHz
• Housing: Aluminum
• Transmitter unit (TX):
  • Dimensions: 3.07" (L) x 1.22" (H) x 1.73" (W)
  • Weight: 0.09 lbs
  • Connector:
    • 1x 3.5mm IR Jack Receiver
    • 1x DC Jack USB power input
    • 1x IR Receiver sensor
    • 1x IR LED indicator
    • 1x Click button lock ID
• Receiver unit (RX):
  • Dimensions: 3.07" (L) x 1.22" (H) x 1.73" (W)
  • Weight: 0.09 lbs
  • Connector:
    • 1x 3.5mm IR Jack Emitter
    • 1x DC Jack USB power input
    • 1x IR Emitter sensor
    • 1x IR LED indicator
    • 1x Click button lock ID
• USB Power cable:
  • Input: 4-Pin USB Type-A Power input
  • Output: DC 5V output
  • Power consumption: 300mW
• Environmental conditions:
  • Operating temperature: 32 to 104 degrees F
  • Storage temperature: -4 to 140 degrees F
  • Relative humidity: 10 to 90% RH (non-condensing)

Extends IR signals allows remote control of your device from long distance

• Wide coverage wireless signals penetrate walls and other obstructions allow you to move around freely and still have IR control of your A/V or other IR enabled equipment from remote locations up to 656ft (200m) away. Note: The wireless operating distance will vary depending on your building layout surrounding obstructions and electronic interference and may be less than the maximum distance
• Compatible with IR remote controls using frequency range between 20KHz - 60KHz
• High performance IR electronics provide real time signal transmission virtually without delay built-in LED indicator illuminates when the IR signal is received for easy status recognition
• Portable size with included IR Blaster and IR Receiver extension cables allows easy and flexible placement anywhere in a home or office environment
• Premium quality metal housing enhances heat dissipation and durability for dependable performance and long life

• Wireless IR Signal Extender Kit
• 2 x USB Power Cable
• IR Blaster Extension Cable
• IR Receiver Extension Cable
• User Reference Guide